HANDLE SS
- Weight:
- 0.6550 LBS
- Catalog:
- Click Here
- Show Options Price Differential:
- Female
- Pack Size:
- Each
- UOM:
- EA
- Material:
- Stainless Steel
- Lock-In / Lock-Out:
- No
- Grease Fitting:
- No
A.L. Hansen
Part# ALH 72 SS RH
Handle Ss
$85.9200
Out of Stock
Handle ss - Lift Handles and Ring Pulls
Read All DetailsRelated Products
Part# AE1-27296 ZN
Cam Only, Diecast Material, 8 Mm Square Hole With Set Screw, Length 32 Mm
$4.6000
A.L. Hansen
Part# AH 2500 SS
Lightweight 16 gauge stainless steel channel is as strong as rod, but significant cost savings. Riveted, long wearing nylon rollers are extra large diameter (1 1/4 in.) to provide firm, snug closure. Easily installed in any metal cabinet. Will accept
$156.0000
Add to Cart
The item has been added
Part# AH 5559 SS
Adjustable Cam With Set Screw Installed, Fits A 5/16 In. Shaft, Length 2.75 In., Stainless Steel
$3.4300
Add to Cart
The item has been added
Part# AH C14 CAM
Cam Only, Steel With Zinc Plating, 5/16 In. Square Hole With Set Screw, 1 11/16 In. Center Of Hole To End Of Cam
$1.8600
Add to Cart
The item has been added
Part# AH 5559 ZN
Adjustable Cam With Set Screw Installed, Fits A 5/16 In. Shaft, Length 2.75 In., Zinc Plated
$2.2700
Add to Cart
The item has been added
Part# AH C15 CAM
Cam Only, Zinc Diecast, 5/16 In. Square Hole With Set Screw, 1 11/16 In. Center Of Hole To End Of Cam
$4.8100
Add to Cart
The item has been added
A.L. Hansen
Part# ALH 105-50 ZN 5/16
2 point center contol only, 5/16 in. studs. Zinc plated and supplied with cotter kit
$23.2900
Add to Cart
The item has been added
A.L. Hansen
Part# ALH 107-50 SS
3 point center control only, 1/4 in. studs, stainless steel
$72.5000
Add to Cart
The item has been added
A.L. Hansen
Part# ALH 107-50 ZN
3 point center control only, 1/4 in. studs, zinc plated
$20.9500
Add to Cart
The item has been added
A.L. Hansen
Part# ALH 55 ZN RH
Compartment Latch with spoon handle, for 5/16 in. square shank. Right hand. Zinc finish
$10.8800
Add to Cart
The item has been added