-
A.L. Hansen
Part# ALH 35L
Hood Latch, Durable Rubber with Zinc-Plated Fitting, 4-39/64 in. L x 3-1/8 in. W
$6.6600Add to Cart The item has been added -
A.L. Hansen
Part# ALH 30-12 CH
Grab Handle, 1/2 In. Diameter Steel Chrome Plated, Length 15 23/32 In., Height 2 1/16 In.
$18.2700Add to Cart The item has been added -
A.L. Hansen
Part# ALH 58 ZN RH
Compartment Latch, accepts 5/16 in. shank, Right Hand, Zinc Plated
$9.5500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 58 ZN LH
Compartment Latch, accepts 5/16 in. shank, Left Hand, Zinc Plated
$9.5500Add to Cart The item has been added -
A.L. Hansen
Part# AH 35R
Hood Latch, Rubber; Complete with Brackets for Vertical or Horizontal Mounting, Brackets Zinc-Plated, Easily Installed Flexible Rubber Catch Compensates for Misalignment; 4-1/2 in. L x 2-5/16 in. W
$6.6600Add to Cart The item has been added -
A.L. Hansen
Part# ALH 35S
Hood Latch, Durable Rubber with Zinc-Plated Fitting, 2-17/32 in. L x 1-27/32 in. W
$4.6100Add to Cart The item has been added -
Out of Stock 
A.L. Hansen
Part# ALH 35L REVERSE
Rubber hood latch, 4 39/64 in. L x 3 1/8 in. W, mounting bracket in up (reverse position)
$5.8900 -
A.L. Hansen
Part# ALH 615 AL
Bar/Cam Lock, with Aluminum Cams & Keepers - Stainless Steel Handle Keeper Assembly Kit
$92.1000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 73NS ZN
Padlockable L-Style Handle, Large Offset Handle For Heaviest Doors, Escutcheon Lip And Moveable Bar Have 15/32 In. Hole For Padlock, Handle Is 1/4 In. Thick X 1 In. W X 7 7/8 In. L, Escutcheon Has (4) Mounting Holes 7/32 In. Diameter, Steel Shank 5/1
$33.5000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 33-24 ZN
Grab Handle, Die Formed Steel Zinc Plated, Overall Length 29 11/16 In., Grab Length 24 1/2 In.
$34.6000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 55 ZN LH
Compartment Latch with spoon handle, for 5/16 in. square shank. Left hand. Zinc finish.
$10.8800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 251 ZN LH 02
Double rotary lock with inside handle, locking with welded seams. Left hand and zinc plated
$85.6600Add to Cart The item has been added -
A.L. Hansen
Part# ALH 52C ZN RB
Compartment Latch that can be used with any handle using standard 5/16 in. shank. Bushing 4 in. from end of lock. Permits use of flush handle without projection beyond door edge. Reverse bolt and zinc plated.
$37.3500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 55 ZN RH
Compartment Latch with spoon handle, for 5/16 in. square shank. Right hand. Zinc finish
$10.8800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 71 ZN
Offset T-Handle, Solid Steel Handle, Zinc Plated, 5/16 In. Square Shaft, 1 9/32 In. Center To Center
$18.8900Add to Cart The item has been added -
A.L. Hansen
Part# ALH 223330 BLK
Grab Handle, 5.374 In. Center To Center, Black Plastic With Uv Additives
$11.0000Add to Cart The item has been added
A.L. Hansen
In 1920, Augie L. Hansen founded the A. L. Hansen Manufacturing Company in Chicago, an entrepreneurial venture known for its innovative products. One of his notable inventions is the "Hansen Tacker," an industrial stapler, as well as the five-sided "Wrigley Revolving Gum Display" found in drugstores. While these products gained fame, the company primarily focused on manufacturing hardware components for the industrial and vehicle markets. For over ninety-five years, the slogan "Hardware for Hard Wear" has represented the company's commitment to quality. As the trailer and truck body markets evolved, Hansen's handles, hinges, latches, and door locks have remained reliable, with many in the NATM and NTEA community continuing to trust these products today.