-
-
Part# SD 109
Push-On Trim Seal, .585" H Edge Trim With .725" Bulb
$2.3800Add to Cart The item has been added -
Part# SD 168
Push-On Bulb Seal; This Flexible Steel Core Is Constructed Of High Carbon Spring Steel, Holds Tight To Flange To Provide The Perfect Seal, Makes A Secure Mtg. System For Decorative Trim, Eliminates The Need For Adhesives, Rivets Or Screws; .580 In. W
$3.2700Add to Cart The item has been added -
Part# SD 503
Push-On Bulb Seal; This Flexible Steel Core Is Constructed Of High Carbon Spring Steel, Holds Tight To Flange To Provide The Perfect Seal, Makes A Secure Mtg. System For Decorative Trim, Eliminates The Need For Adhesives, Rivets Or Screws; 1.250 In.
$2.5400Add to Cart The item has been added -
Part# R426002
Push-On Trim Seal, Black Epdb Rubber, Clamping Range 1.5 - 3.0mm - 1 - 2
$4.7400Add to Cart The item has been added -
Part# R426001
Push-On Trim Seal, Black Epdb Rubber, Clamping Range 1.3 - 2.5mm
$5.2300Add to Cart The item has been added -
Part# R427008
Push-On Trim Seal, Black Epdb Rubber, Clamping Range 1.5 - 3.0mm - 1
$4.3700Add to Cart The item has been added -
Part# R426005
Push-On Trim Seal, Black Epdb Rubber, Clamping Range 1.5 - 3.0mm
$4.4000Add to Cart The item has been added -
-
Cooper-Standard (StanPro)
Part# AS 75001899
Push-On Trim Seal, Dual Durometer Sponge And Solid Rubber, Flexible Wire Core, For .040 In. To .070 In. Flange Thickness, Section No. Rs-130, Sold by the foot.
$4.2000Add to Cart The item has been added -
Cooper-Standard (StanPro)
Part# AS 75001360
Push-On Trim Seal, Dual Durometer Sponge And Solid Rubber, Flexible Wire Core, For .065 In. To .095 In. Flange Thickness, Section No. Rs-128 (25 Ft. Coil)
$52.9300Add to Cart The item has been added -
Cooper-Standard (StanPro)
Part# AS 75001364
Push-On Trim Seal, Dual Durometer Sponge And Solid Rubber, Flexible Wire Core, For .090 In. To .120 In. Flange Thickness, Section No. Rs-132 (25 Ft. Coil)
$58.0400Add to Cart The item has been added -
Cooper-Standard (StanPro)
Part# AS 75001362
Push-On Trim Seal, Dual Durometer Sponge And Solid Rubber, Flexible Wire Core, For .040 In. To .070 In. Flange Thickness, Section No. Rs-130 (25 Ft. Coil)
$55.7600Add to Cart The item has been added -
Cooper-Standard (StanPro)
Part# AS 75001361
Push-On Trim Seal, Dual Durometer Sponge And Solid Rubber, Flexible Wire Core, For .090 In. To .120 In. Flange Thickness, Section No. Rs-129 (25 Ft. Coil)
$52.9300Add to Cart The item has been added -
Cooper-Standard (StanPro)
Part# AS 75001616
Push-On Trim Seal, Dual Durometer Sponge And Solid Rubber, Flexible Wire Core, For .110 In. To .130 In. Flange Thickness, Section No. Rs-438 (25 Ft. Coil)
$113.0900Add to Cart The item has been added -
Out of Stock 
Cooper-Standard (StanPro)
Part# AS 75000351
Push-On Trim Seal, Vinyl And Sponge Rubber, Flexible Segmented Steel Core, Grips Edges From .060 In. To .140 In. Thick, Section No. St-36-A (25 Ft. Coil)
$65.9200
Push-On Trim Seal
Seal, protect, and finish exposed metal edges with our Push-On Trim Seal—a versatile and durable solution that combines edge protection and weather sealing in one. Made with EPDM rubber and a flexible steel or wire core, these trim seals fit snugly to raw edges, flanges, and panels without screws or adhesive. They block out wind, dust, moisture, and vibration, preventing damage to sharp edges. Perfect for vehicle compartments, trailers, cabinetry, industrial enclosures, and mobile equipment. Select from a wide range of profiles, flange clamping ranges, and finishes for reliable performance and clean aesthetics.