Slam Latches

View as Grid List

Items 1-24 of 160

Page
Set Descending Direction
per page
  1. End Bolt, Offset, 30 degree, for use with Flat Rod, Zinc Finish
    End Bolt, Offset, 30 degree, for use with Flat Rod, Zinc Finish
    PART NUMBER:  ALH 90-W ZN O
    $9.67
    -
    +
    Quick Shop Add to Compare
  2. Compartment Latch, accepts 5/16 in. shank, Left Hand, Zinc Plated
    Compartment Latch, accepts 5/16 in. shank, Left Hand, Zinc Plated
    PART NUMBER:  ALH 58 ZN LH
    $9.55
    -
    +
    Quick Shop Add to Compare
  3. 36 in. cable with sleeve end fitting for EMC 565698 series latches
    36 in. cable with sleeve end fitting for EMC 565698 series latches
    PART NUMBER:  EMC 565698-5 ZN
    $5.81
    -
    +
    Quick Shop Add to Compare
  4. Southco S 93-307
    Keylocking flush/knob latch, plastic, black, .97-1.00 in. grip range, threaded body and nut installation, .00-.50 in. panel thickness, latch only style
    PART NUMBER:  S 93-307
    $12.21
    -
    +
    Quick Shop Add to Compare
  5. End Bolt, Flush, 45 degree, for use with with Flat Rod, Zinc Finish
    End Bolt, Flush, 45 degree, for use with with Flat Rod, Zinc Finish
    PART NUMBER:  ALH 90-W ZN F 45
    $24.44
    -
    +
    Quick Shop Add to Compare
  6. Safety Slam Latch with 5/16 in. square hole, 5 45/64 in. length x 4 29/32 in. width x 3/4 in. thick
    Safety Slam Latch with 5/16 in. square hole, 5 45/64 in. length x 4 29/32 in. width x 3/4 in. thick
    PART NUMBER:  HI 550-1
    $79.80
    -
    +
    Quick Shop Add to Compare
  7. DRAWER LATCH HANDLE ROD-SHORT
    DRAWER LATCH HANDLE ROD-SHORT
    PART NUMBER:  SLL-1918-005-13
    $2.65
    -
    +
    Quick Shop Add to Compare
  8. DRAWER LATCH ROD- LONG
    DRAWER LATCH ROD- LONG
    PART NUMBER:  SLL-1918-004-39
    $2.40
    -
    +
    Quick Shop Add to Compare
  9. DRAWER LATCH HANDLE ROD-LONG
    DRAWER LATCH HANDLE ROD-LONG
    PART NUMBER:  SLL-1918-005-39
    $4.00
    -
    +
    Quick Shop Add to Compare
  10. Southco S A3-40-525-12
    Slide latch, plastic, ABS material grade, black, .25-.26 in. grip range, .04-.05 panel thickness, low profile, medium
    PART NUMBER:  S A3-40-525-12
    $2.23
    -
    +
    Quick Shop Add to Compare
  11. Southco S C3-803
    Grabber catch latch, plastic, black, rivet/screw installation, no switch, 2.92 lbs. pullup
    PART NUMBER:  S C3-803
    $4.53
    -
    +
    Quick Shop Add to Compare
  12. Flush pull latch, plastic, black, key locking, .98-1.02 in. grip range, .08-.28 panel thickness, medium
    Flush pull latch, plastic, black, key locking, .98-1.02 in. grip range, .08-.28 panel thickness, medium
    PART NUMBER:  S M1-41
    $20.01
    -
    +
    Quick Shop Add to Compare
  13. Southco S MM-05-105-10
    GRABBER PANEL LATCH .75-1" GRIP
    PART NUMBER:  S MM-05-105-10
    $273.33
    -
    +
    Quick Shop Add to Compare
  14. Center Only with Pins and Washers
    Center Only with Pins and Washers
    PART NUMBER:  ALH 114-50 ZN
    $25.40
    -
    +
    Quick Shop Add to Compare
  15. Offset end bolt, accepts 3/8 in. rod, zinc plated
    Offset end bolt, accepts 3/8 in. rod, zinc plated
    PART NUMBER:  ALH 120 ZN O 3/8
    $22.65
    -
    +
    Quick Shop Add to Compare
  16. Compartment Latch with Inside Handle, for 5/16 in. square shank. No mortising required. For limited space. Can be applied to door frame 2 in. W. Die formed bushing. Left hand. Zinc finish.
    Compartment Latch with Inside Handle, for 5/16 in. square shank. No mortising required. For limited space. Can be applied to door frame 2 in. W. Die formed bushing. Left hand. Zinc finish.
    PART NUMBER:  ALH 57 ZN LH
    $15.12
    -
    +
    Quick Shop Add to Compare
  17. End Latch Bolt, Finger Pull; Ideal for Drawers and Small Cabinets; with Holes, 7/32 in. Dia. On 1-1/8 in. x 1-1/4 in. Centers, ZN, Reverse Bolt
    End Latch Bolt, Finger Pull; Ideal for Drawers and Small Cabinets; with Holes, 7/32 in. Dia. On 1-1/8 in. x 1-1/4 in. Centers, ZN, Reverse Bolt
    PART NUMBER:  AH 5597 ZN W/H
    $7.73
    -
    +
    Quick Shop Add to Compare
  18. Heavy Duty Compartment Latch less Bronze Striker, Steel Construction. Accepts 5/16 in. shank with inside handle and locking trigger. Left Hand, Zinc Plated
    Heavy Duty Compartment Latch less Bronze Striker, Steel Construction. Accepts 5/16 in. shank with inside handle and locking trigger. Left Hand, Zinc Plated
    PART NUMBER:  ALH 56ASL-51 ZN LH
    $64.18
    -
    +
    Quick Shop Add to Compare
  19. Keeper only for 93 Series Latches
    Keeper only for 93 Series Latches
    PART NUMBER:  S 93-14-101-11/3
    $0.69
    -
    +
    Quick Shop Add to Compare
  20. End Bolt, Flush, 3-3/4 in. L x 2-1/8 in. W, Accepts 3/8 in. Dia. Rod, Zinc Finish
    End Bolt, Flush, 3-3/4 in. L x 2-1/8 in. W, Accepts 3/8 in. Dia. Rod, Zinc Finish
    PART NUMBER:  ALH 90 ZN F 3/8
    $11.24
    -
    +
    Quick Shop Add to Compare
  21. Left Hand Pictured
    Compartment Latch, Steel Construction with Inside Handle and Locking Trigger, Right Hand, Zinc Plated
    PART NUMBER:  ALH 56 ZN RH
    $23.80
    -
    +
    Quick Shop Add to Compare
View as Grid List

Items 1-24 of 160

Page
Set Descending Direction
per page
www.austinhardware.com/about-us