-
A.L. Hansen
Part# ALH 35L
Hood Latch, Durable Rubber with Zinc-Plated Fitting, 4-39/64 in. L x 3-1/8 in. W
$7.3400Add to Cart The item has been added -
A.L. Hansen
Part# ALH 31-8 ZN 1 HL
Grab Handle, 1/2 In. Diameter Steel, Length 13 In. Height 1 5/8 In. One Mounting Hole On Each End, Zinc Plated
$6.3600Add to Cart The item has been added -
A.L. Hansen
Part# ALH 33-24 CH
Grab Handle, Die Formed Steel Chrome Plated, Overall Length 29 11/16 In., Grab Length 24 1/2 In.
$30.3900Add to Cart The item has been added -
A.L. Hansen
Part# ALH 30-6 BLK
Grab Handle, 1/2 In. Diameter Steel Black Vinyl Coated, Length 9 5/8 In. Height 2.953 In.
$22.6000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 223330 BLK
Grab Handle, 5.374 In. Center To Center, Black Plastic With Uv Additives
$10.6700Add to Cart The item has been added -
A.L. Hansen
Part# ALH 2B ZN
Hinge 1/2 In. Pin Loose Pin
$12.1400Add to Cart The item has been added -
A.L. Hansen
Part# ALH 58 ZN RH
Compartment Latch, accepts 5/16 in. shank, Right Hand, Zinc Plated
$9.5500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 55 ZN LH
Compartment Latch with spoon handle, for 5/16 in. square shank. Left hand. Zinc finish.
$10.8800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 311A ZN 48
3-Point Dead Bolt Latch, Heavy Duty, with Override and Round Rods for use with handles with a 1/2 in. square shank. Kit includes (1) center control with overrride, (2) 48 in. round rods, (2) rod guides, (1) washer kit, (1) inside handle, and (1) anti
$99.3100Add to Cart The item has been added -
A.L. Hansen
Part# ALH 251-A ZN
Rear striker for 251 series lock, zinc plated
$9.5100Add to Cart The item has been added -
A.L. Hansen
Part# ALH 33-18 CH
Grab Handle, Die Formed Steel Chrome Plated, Overall Length 23 11/16 In., Grab Length 18 1/2 In.
$38.2900Add to Cart The item has been added -
A.L. Hansen
Part# ALH 56A ZN LH
Compartment Latch, Steel Construction, Accepts 5/16 in. shank with inside handle and locking trigger. Left Hand, Zinc Plated
$37.4500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 311-6 ZN
Inside Handle for ALH 311 Series Dead Bolt Latches
$3.5200Add to Cart The item has been added -
-
A.L. Hansen
Part# ALH 57 ZN RH
Compartment Latch with Inside Handle, for 5/16 in. square shank. No mortising required. For limited space. Can be applied to door frame 2 in. W. Die formed bushing. Right hand. Zinc finish.
$15.1200Add to Cart The item has been added -
A.L. Hansen
Part# ALH 610 BAR LOCK AL
Reverse butt, stainless steel, washers
$58.9000Add to Cart The item has been added
A.L. Hansen
In 1920, Augie L. Hansen founded the A. L. Hansen Manufacturing Company in Chicago, an entrepreneurial venture known for its innovative products. One of his notable inventions is the "Hansen Tacker," an industrial stapler, as well as the five-sided "Wrigley Revolving Gum Display" found in drugstores. While these products gained fame, the company primarily focused on manufacturing hardware components for the industrial and vehicle markets. For over ninety-five years, the slogan "Hardware for Hard Wear" has represented the company's commitment to quality. As the trailer and truck body markets evolved, Hansen's handles, hinges, latches, and door locks have remained reliable, with many in the NATM and NTEA community continuing to trust these products today.