-
A.L. Hansen
Part# ALH M1A SS
Hinge, 1/2in. Pin Not Welded In, Stainless Steel
$20.3800Add to Cart The item has been added -
A.L. Hansen
Part# ALH M1A PL
Hinge, 1/2in. Pin Not Welded In
$8.1900Add to Cart The item has been added -
A.L. Hansen
Part# ALH 6B-51
Large Leaf(W/Round Holes)For Alh 6b
$3.2200Add to Cart The item has been added -
-
Out of Stock 
-
A.L. Hansen
Part# ALH 72 ZN RH
T-Handle, Offset, Padlocking, Steel Material, Zinc Plated, Right Hand, 5/16 In. Square Shaft, 4 In. X 3/4 In. Grip, 3/8 In. Diameter Padlocking Hole
$29.1800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90M SS
End Bolt, Flush, 45 degree, with mounting holes and a 1 in. throw, Stainless Steel
$20.1700Add to Cart The item has been added -
A.L. Hansen
Part# ALH 72 ZN LH
T-Handle, Offset, Padlocking, Steel Material, Zinc Plated, Left Hand, 5/16 In. Square Shaft, 4 In. X 3/4 In. Grip, 3/8 In. Diameter Padlocking Hole
$29.1800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 6B ZN
Electrical Hinge With Groove Pin
$8.2700Add to Cart The item has been added -
-
A.L. Hansen
Part# ALH M1A-50 SS
Hinge Leaf Only, Stainless Steel
$5.3500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 71 ZN
Offset T-Handle, Solid Steel Handle, Zinc Plated, 5/16 In. Square Shaft, 1 9/32 In. Center To Center
$18.8900Add to Cart The item has been added -
-
A.L. Hansen
Part# ALH 33-24 ZN
Grab Handle, Die Formed Steel Zinc Plated, Overall Length 29 11/16 In., Grab Length 24 1/2 In.
$32.5100Add to Cart The item has been added -
A.L. Hansen
Part# ALH 2B HINGE
Hinge, Not Welded, 1/2in. Pin
$11.7800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 54 ZN LH
Compartment Latch with Inside handle,Accepts 5/16" Shank, Left hand. Zinc finish. (Left Hand Pictured)
$37.2200Add to Cart The item has been added
A.L. Hansen
In 1920, Augie L. Hansen founded the A. L. Hansen Manufacturing Company in Chicago, an entrepreneurial venture known for its innovative products. One of his notable inventions is the "Hansen Tacker," an industrial stapler, as well as the five-sided "Wrigley Revolving Gum Display" found in drugstores. While these products gained fame, the company primarily focused on manufacturing hardware components for the industrial and vehicle markets. For over ninety-five years, the slogan "Hardware for Hard Wear" has represented the company's commitment to quality. As the trailer and truck body markets evolved, Hansen's handles, hinges, latches, and door locks have remained reliable, with many in the NATM and NTEA community continuing to trust these products today.