-
Out of Stock 
A.L. Hansen
Part# ALH 76 SS
Stainless Steel Handle, 4 In. X 3/4 In.. Two 7/32 In. Mounting Holes On 1-1/4 In. Centers. 5/16 In. X 3 In. Square Shank.
$54.3100 -
A.L. Hansen
Part# ALH WASHER KIT
Cotter kit with washers
$0.9412Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90 ZN F 3/8 RB
End Bolt, Flush, with Reverse Bolt, Accepts 3/8 in. Dia. Rod, Zinc Finish
$9.4900Add to Cart The item has been added -
Out of Stock 
-
A.L. Hansen
Part# ALH 90 ZN F W/O
END BOLT W/O FINGER PULL HOOK
$11.2400Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90 ZN F W/O RB
End Bolt, Flush, No Finger Pull, with Reverse Bolt, Accepts 1/4 in. Dia. Rod, Zinc Finish
$10.8900Add to Cart The item has been added -
A.L. Hansen
Part# ALH 94-50 ZN RH
2-Point Door Lock, Center Case ONLY, Right Hand, Zinc Finish - Quick slamming, wide adapability, easy installation
$13.7100Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90-W ZN F 30
End Bolt, Flush, 30 degree, for use with with Flat Rod, Zinc Finish
$15.8000Add to Cart The item has been added -
A.L. Hansen
Part# ALH M1A PL 3/8
Hinge, 3/8in. Pin Not Welded In
$14.0000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90-W ZN O
End Bolt, Offset, 30 degree, for use with Flat Rod, Zinc Finish
$11.5400Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90 ZN F 3/8
End Bolt, Flush, 3-3/4 in. L x 2-1/8 in. W, Accepts 3/8 in. Dia. Rod, Zinc Finish
$11.2400Add to Cart The item has been added -
Out of Stock 
-
A.L. Hansen
Part# ALH 615 AL
Bar/Cam Lock, with Aluminum Cams & Keepers; Stainless Steel Handle Keeper Assembly Kit Includes RH & LH Anti-Rack Cams, (2) Anti-Rack Keepers, (3) Nylon Lower Bearing Plates, (3) Aluminum Upper Bearing Plates, Plastic -Coated Aluminum Handle & Stainl
$92.1000Add to Cart The item has been added -
Out of Stock 
-
A.L. Hansen
Part# ALH 88 HDL KIT CHR
Handle Kit with Vinyl Knob and Chrome Handle for Window Regulator
$17.2000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 73NS SS
Pdlk.Hdl.W/Steel Shft & Gasket 304ss
$65.4400Add to Cart The item has been added
A.L. Hansen
In 1920, Augie L. Hansen founded the A. L. Hansen Manufacturing Company in Chicago, an entrepreneurial venture known for its innovative products. One of his notable inventions is the "Hansen Tacker," an industrial stapler, as well as the five-sided "Wrigley Revolving Gum Display" found in drugstores. While these products gained fame, the company primarily focused on manufacturing hardware components for the industrial and vehicle markets. For over ninety-five years, the slogan "Hardware for Hard Wear" has represented the company's commitment to quality. As the trailer and truck body markets evolved, Hansen's handles, hinges, latches, and door locks have remained reliable, with many in the NATM and NTEA community continuing to trust these products today.