-
A.L. Hansen
Part# AH TINNERMAN 5/16
Round Washer for 5/16 Square Shaft
$0.5000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 111C ZN 1250
Locking Zinc Handle, 1/2" Sqr Shaft, Ka 1250
$116.6900Add to Cart The item has been added -
A.L. Hansen
Part# ALH 12-C AL
Hinge With Grease Fitting, Aluminum
$117.6300Add to Cart The item has been added -
A.L. Hansen
Part# ALH 110-52 ZN O
End Bolt, Offset, 3-1/2 in. L x 2-1/16 in. W with a 9/16 in. Offset, Reversed 45 degree bolt. For use with 3/8 in. diameter rods. Zinc plated
$16.0000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 111-5-48 ZN
ROD FOR ALH 211 ZN 1/2" X 48"
$14.8600Add to Cart The item has been added -
Out of Stock 
-
A.L. Hansen
Part# ALH 114-6X-36 ZN
Rod Only, Zinc Plated, 3/8 in. Diameter, Length 36 in., Slotted Hole
$8.0500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 111C-51 1250
Key Cylinder 1250 For Alh 111c Series Handles
$12.8300Add to Cart The item has been added -
A.L. Hansen
Part# ALH 120 ZN O 3/8
Offset end bolt, accepts 3/8 in. rod, zinc plated
$22.6500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 120 ZN F W/O
Flush End Bolt, accepts 1/4 in. Rod, finger pull or cable eye, Zinc Plated
$13.9800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 111C-51 545
Lock Cylinder For 111c Handles
$12.8300Add to Cart The item has been added -
A.L. Hansen
Part# ALH 107-50 ZN
3 point center control only, 1/4 in. studs, zinc plated
$20.9500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 114-50 ZN
Center Only with Pins and Washers
$25.4000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 12-A PL
Flush Hinge, Plain Finish
$33.5800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 107-50 SS
3 point center control only, 1/4 in. studs, stainless steel
$72.5000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 111C-5/8 ZN SP
L Hdl Hvy Dty Spl Mtg/Plt Nocy
$106.4700Add to Cart The item has been added
A.L. Hansen
In 1920, Augie L. Hansen founded the A. L. Hansen Manufacturing Company in Chicago, an entrepreneurial venture known for its innovative products. One of his notable inventions is the "Hansen Tacker," an industrial stapler, as well as the five-sided "Wrigley Revolving Gum Display" found in drugstores. While these products gained fame, the company primarily focused on manufacturing hardware components for the industrial and vehicle markets. For over ninety-five years, the slogan "Hardware for Hard Wear" has represented the company's commitment to quality. As the trailer and truck body markets evolved, Hansen's handles, hinges, latches, and door locks have remained reliable, with many in the NATM and NTEA community continuing to trust these products today.