-
A.L. Hansen
Part# ALH 311A ZN 48
3-Point Dead Bolt Latch, Heavy Duty, with Override and Round Rods for use with handles with a 1/2 in. square shank. Kit includes (1) center control with overrride, (2) 48 in. round rods, (2) rod guides, (1) washer kit, (1) inside handle, and (1) anti
$99.3100Add to Cart The item has been added -
A.L. Hansen
Part# ALH 251-A ZN
Rear striker for 251 series lock, zinc plated
$9.5100Add to Cart The item has been added -
A.L. Hansen
Part# ALH 33-18 CH
Grab Handle, Die Formed Steel Chrome Plated, Overall Length 23 11/16 In., Grab Length 18 1/2 In.
$38.2900Add to Cart The item has been added -
A.L. Hansen
Part# ALH 311-6 ZN
Inside Handle for ALH 311 Series Dead Bolt Latches
$3.5200Add to Cart The item has been added -
Hansen International
Part# ALH 279L SS 1250
Flush, Single Point D-Ring Latch, 6-1/8 In. Dia., Key-Locking, With 5/16 In. Square Shank, Ss
$78.8600Add to Cart The item has been added -
A.L. Hansen
Part# ALH 610 BAR LOCK AL
Reverse butt, stainless steel, washers
$58.9000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 251 ZN LH 02
Double rotary lock with inside handle, locking with welded seams. Left hand and zinc plated
$77.8000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 5UB AL FP
Aluminum Hinge With No Holes, Fixed Pin
$21.2400Add to Cart The item has been added -
A.L. Hansen
Part# ALH 35M SS
Hood Latch, Durable Rubber with Stainless Steel Fitting, 3-3/8 in. L x 2-13/32 in. W
$10.1600Add to Cart The item has been added -
A.L. Hansen
Part# ALH 450 ZN LH
Designed for installations where the 400 series rotaqries cannot be used due to lever arm actuator position. Actuator position of 450 series is located below the striker entry level. Meets FMVSS 206 standards for personnel restraint when used in - 1
$20.0400Add to Cart The item has been added -
A.L. Hansen
Part# ALH 311-50 ZN 5/8
3-Point Dead Bolt Latch, Heavy Duty, Center Case ONLY for ALH 311 ZN. Supplied with a cotter kit. 5/8 in. square hole for handle insert.
$87.7400Add to Cart The item has been added -
A.L. Hansen
Part# ALH 30-12 CH
Grab Handle, 1/2 In. Diameter Steel Chrome Plated, Length 15 23/32 In., Height 2 1/16 In.
$18.2700Add to Cart The item has been added -
Hansen International
Part# ALH 279S SS 1250
D-Ring, Flush, Single Point D-Ring, Locking, 4-7/8 In. W, 5-16 In. Square Shank, Stainless Steel, Handle With Bent Ring
$67.8600Add to Cart The item has been added -
Out of Stock 
Hansen International
Part# ALH 1DSL-51 CH545
Lock Cylinder Only For Alh 1dsl, With Cam & Nut, Keyed Ch545
$11.4900 -
A.L. Hansen
Part# ALH 29-6-WC
Door Holder, Thermo Plastic, 6 in. Wire, Grey, 4 Pieces
$3.1600Add to Cart The item has been added -
A.L. Hansen
Part# ALH 60072 0001
L-Style Handle, Zinc Die-Cast Construction, Black Textured Urethane Powder Finish, 180 Handle Rotation, Blind Mounting, Supplied With Two Keys
$92.1900Add to Cart The item has been added