-
Part# DS 602
Fully retractable locators, these models mount directly through a member by a jam nut on the work side or flush by drilling and tapping the member. Locks in extended or retracted position. When flush mounted, plunger completely retracts from work
$36.5900Add to Cart The item has been added -
Eberhard
Part# EMC 1-585809 GV
Footstep, folding; meets requirements of federal highway administration regulation 49 cfr, section399, minimum 5 in. Dia., can withstand a vertical static load of 500lbs., serrated surface, offset clearance when closed of 13/16 in., Galvanized
$119.9300Add to Cart The item has been added -
Part# DS 341
Pull action latch clamp, U-hook style latch clamp supplied with threaded U-hooks for easy adjustment, 8,900N holding capacity
$56.4300Add to Cart The item has been added -
Eberhard
Part# EMC 1-400 ZN LH
Passenger restraint latches, antirattle feature is standard on all actuators. Modified actuator with (2) 1/4 diameter holes. Left hand and zinc plated. Order striker separately (EMC 2-400-52 ZN).
$20.9500Add to Cart The item has been added -
Out of Stock 
-
-
Out of Stock 
-
Eberhard
Part# EMC 1-240 ZN RH
Mini rotary latch gives you the benefits of either two-stage or single stage rotary action for even the most confined areas. It is ideal for small hoods, lid doors and panels, and has a maximum rated load strength of 750 lbs. The mini rotary latch is
$26.5000Add to Cart The item has been added -
Eberhard
Part# EMC 1-400 ZN RH
Passenger restraint latches, antirattle feature is standard on all actuators. Modified actuator with (2) 1/4 diameter holes. Right hand and zinc plated. Order striker separately (EMC 2-400-52 ZN).
$20.9500Add to Cart The item has been added -
Part# EAA 8700-90
Gas Spring, Metal End, 8mm rod diameter, 19mm tube diameter, 19.63 in. extended, 7 in. stroke, 90 lb. force
$59.2600Add to Cart The item has been added -
Eberhard
Part# EMC 12-90320 SS PKR
Flush, D-Ring Compression Latch, 3-Point, Key-Locking; with a double-bitted key with padlock cylinder and 2 keys, key cylinder cover, large die cast handle, 2 rod adapters for 5-16 in. rods, (4) Mtg. studs, SS, RH
$103.2700Add to Cart The item has been added -
Part# DS 351
The pull action of Model 351 is excellent for many types of latching operations. With base bolted or welded in place, unit can be used for latching pressure vessels, clean-out doors, etc. Pull bar is threaded for convenient adjustment. Furnished with
$28.6300Add to Cart The item has been added -
Eberhard
Part# EMC 1-300 ZN RH
This dual stage latch is intended for use on compartment doors or any other enclosure that would benefit from positive latching. Its compactness and simplicity allow it to be used in many applications where economy of space is desirable. Heat treated
$25.4500Add to Cart The item has been added -
Part# DCEZ-0715-1150 ZN
Overhead Door Check, 15 LB Spring, With Cotter
$29.6600Add to Cart The item has been added -
Genesis
Part# DH-GRB-02-300
3" Adjustable Door Grabber - Zinc/ Stainless Steel
$41.7200Add to Cart The item has been added -
Part# DH 158 ZN
Door Holdback, Plunger Only, 1-5/8 in. L, Zinc Finish
$3.3900Add to Cart The item has been added