-
A.L. Hansen
Part# ALH 30-12 CH
Grab Handle, 1/2 In. Diameter Steel Chrome Plated, Length 15 23/32 In., Height 2 1/16 In.
$18.2700Add to Cart The item has been added -
A.L. Hansen
Part# ALH 33-18 ZN
Grab Handle, Die Formed Steel Zinc Plated, Overall Length 23 11/16 In., Grab Length 18 1/2 In.
$25.9800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 56 ZN RH
Compartment Latch, Steel Construction with Inside Handle and Locking Trigger, Right Hand, Zinc Plated
$23.8000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 31-8 CH 1HL
Grab Handle, 1/2 In. Diameter Steel, Length 13 In., Height 1 5/8 In. One Mounting Hole On Each End, Chrome Plated.
$16.1800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 30-14 CH
Grab Handle, 1/2 In. Diameter Steel Chrome Plated, Length 17 23/32 In., Height 2 1/16 In.
$20.3300Add to Cart The item has been added -
A.L. Hansen
Part# ALH 5X-52 ZN
Steel Pin Only For 5x Al Zn
$4.0000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 55A ZN LH
Cab Lock with inside handle. Left hand, zinc plated.
$26.4500Add to Cart The item has been added -
Out of Stock 
-
A.L. Hansen
Part# ALH 4NB ZN
Strap Hinge, Flush, With Holes, Zinc Plated
$30.4500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 311AH-55 ZN
Square head bolt for 311-52
$0.6667Add to Cart The item has been added -
A.L. Hansen
Part# ALH 250-8 ZN
REAR STRIKER 5/8 TALL BUMPER
$11.1600Add to Cart The item has been added -
A.L. Hansen
Part# ALH 58 ZN LH
Compartment Latch, accepts 5/16 in. shank, Left Hand, Zinc Plated
$9.5500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 42H ZN
Universal Sliding Door Latch with Inside Release Lever, Accepts Any Handle with 5/16" Square Shaft, Zinc Plated.
$31.9300Add to Cart The item has been added -
A.L. Hansen
Part# ALH 311-54 PL
Roll Pin ONLY for ALH 311 series lock kit
$0.7619Add to Cart The item has been added -
A.L. Hansen
Part# ALH 52C ZN RB
Compartment Latch that can be used with any handle using standard 5/16 in. shank. Bushing 4 in. from end of lock. Permits use of flush handle without projection beyond door edge. Reverse bolt and zinc plated.
$37.3500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 33-36 CH
Grab Handle, Die Formed Steel Chrome Plated, Overall Length 41 11/16 In., Grab Length 36 1/2 In.
$36.9300Add to Cart The item has been added
A.L. Hansen
In 1920, Augie L. Hansen founded the A. L. Hansen Manufacturing Company in Chicago, an entrepreneurial venture known for its innovative products. One of his notable inventions is the "Hansen Tacker," an industrial stapler, as well as the five-sided "Wrigley Revolving Gum Display" found in drugstores. While these products gained fame, the company primarily focused on manufacturing hardware components for the industrial and vehicle markets. For over ninety-five years, the slogan "Hardware for Hard Wear" has represented the company's commitment to quality. As the trailer and truck body markets evolved, Hansen's handles, hinges, latches, and door locks have remained reliable, with many in the NATM and NTEA community continuing to trust these products today.