-
A.L. Hansen
Part# ALH 97119 BLK LH
GAS SPRING SUPPORT ARM
$35.0000Add to Cart The item has been added -
Out of Stock 
-
A.L. Hansen
Part# ALH 6B ZN SQH
Hinge Square Holes Both Leaves
$6.1800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90 ZN F 3/8 RB
End Bolt, Flush, with Reverse Bolt, Accepts 3/8 in. Dia. Rod, Zinc Finish
$9.4900Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90 ZN F W/O RB
End Bolt, Flush, No Finger Pull, with Reverse Bolt, Accepts 1/4 in. Dia. Rod, Zinc Finish
$10.8900Add to Cart The item has been added -
A.L. Hansen
Part# ALH 94-50 ZN RH
2-Point Door Lock, Center Case ONLY, Right Hand, Zinc Finish - Quick slamming, wide adapability, easy installation
$13.7100Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90-W ZN F 30
End Bolt, Flush, 30 degree, for use with with Flat Rod, Zinc Finish
$15.8000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90-W ZN O
End Bolt, Offset, 30 degree, for use with Flat Rod, Zinc Finish
$11.5400Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90 ZN F 3/8
End Bolt, Flush, 3-3/4 in. L x 2-1/8 in. W, Accepts 3/8 in. Dia. Rod, Zinc Finish
$11.2400Add to Cart The item has been added -
A.L. Hansen
Part# ALH 6B-51
Large Leaf(W/Round Holes)For Alh 6b
$3.2200Add to Cart The item has been added -
A.L. Hansen
Part# ALH 6B ZN
Electrical Hinge With Groove Pin
$8.2700Add to Cart The item has been added -
-
A.L. Hansen
Part# ALH 33-24 ZN
Grab Handle, Die Formed Steel Zinc Plated, Overall Length 29 11/16 In., Grab Length 24 1/2 In.
$32.5100Add to Cart The item has been added -
A.L. Hansen
Part# ALH 54 ZN LH
Compartment Latch with Inside handle,Accepts 5/16" Shank, Left hand. Zinc finish. (Left Hand Pictured)
$37.2200Add to Cart The item has been added -
A.L. Hansen
Part# ALH 31-8 ZN 1 HL
Grab Handle, 1/2 In. Diameter Steel, Length 13 In. Height 1 5/8 In. One Mounting Hole On Each End, Zinc Plated
$6.3600Add to Cart The item has been added -
A.L. Hansen
Part# ALH 33-24 CH
Grab Handle, Die Formed Steel Chrome Plated, Overall Length 29 11/16 In., Grab Length 24 1/2 In.
$30.3900Add to Cart The item has been added
A.L. Hansen
In 1920, Augie L. Hansen founded the A. L. Hansen Manufacturing Company in Chicago, an entrepreneurial venture known for its innovative products. One of his notable inventions is the "Hansen Tacker," an industrial stapler, as well as the five-sided "Wrigley Revolving Gum Display" found in drugstores. While these products gained fame, the company primarily focused on manufacturing hardware components for the industrial and vehicle markets. For over ninety-five years, the slogan "Hardware for Hard Wear" has represented the company's commitment to quality. As the trailer and truck body markets evolved, Hansen's handles, hinges, latches, and door locks have remained reliable, with many in the NATM and NTEA community continuing to trust these products today.