-
Out of Stock 
A.L. Hansen
Part# TH96
Surface Mount Tie Down D-Ring With Spacer, 500 Lbs. Working Load Limit, Zinc Plated
$3.1800 -
A.L. Hansen
Part# TH555 ZN
Grab Handle, Solid Diecast, Zinc Plated, Overall Length 8 15/16 In. Height 1 25/32 In.Four Mounting For Oval Head Screws
$14.3300Add to Cart The item has been added -
A.L. Hansen
Part# TB550 ZN
Grab Handle, Stamped Steel, Zinc Plated, Hollow, Overall Length 8 15/16 In. Height 1 25/32 In.Four Mounting For Oval Head Screws
$8.3300Add to Cart The item has been added -
A.L. Hansen
Part# TBL-1 ZN
Universal tool box lock, for tool box or small door attached to inside. Fastened in place by screw at each end or can be spot welded to metal door. Zinc plated.
$3.6300Add to Cart The item has been added -
A.L. Hansen
Part# TD-15R ZN
Surface Mount D-Ring And Clip Only (no Cup), Zinc Plated
$1.4300Add to Cart The item has been added -
A.L. Hansen
Part# DCEZ ZN SPEC IMT
DOOR CHECK W/MTG.BRACKET IMT
$10.0800Add to Cart The item has been added -
A.L. Hansen
Part# CH 2399-D ZN
Grab Handle, .63 Grab Width, Length 11 In., Height 2 In. Zinc Plated
$11.6300Add to Cart The item has been added -
A.L. Hansen
Part# ALH 94-C-50 ZN
CENTER ONLY FOR CABLE LOCK
$20.6100Add to Cart The item has been added -
A.L. Hansen
Part# ALH 8700 ZN 38
Rod Only, Zinc Plated, 1/2 in. Flat Rod, Length 38 in., Slotted Hole 1/2 in. x 1/4 in.
$7.9800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 76 ZN
Zinc Plated Handle, 4 In. X 3/4 In.. Two 7/32 In. Mounting Holes On 1-1/4 In. Centers. 5/16 In. X 3 In. Square Shank.
$26.8100Add to Cart The item has been added -
Out of Stock 
A.L. Hansen
Part# ALH 78 SS
T-Handle, Removable, Stainless Steel, 3 1/2 In. X 3/4 In. Grip, 3 5/16 In. Long 5/16 In. Square Shaft
$43.0300 -
A.L. Hansen
Part# ALH 6B ZN SQH
Hinge Square Holes Both Leaves
$6.1800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90 ZN O W/O
End Bolt, Offset 9/16 In., No Finger Hook, 3-3/4 In. L X 2-1/8 In. W, Accepts 1/4 In. Dia. Rod, Zinc Finish
$22.8200Add to Cart The item has been added -
A.L. Hansen
Part# ALH 94-6X-36 ZN
Rod Only, Zinc Plated, 1/4 In. Round Diameter, 90 Degree Bend At One End
$3.3500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90 ZN F W/O
END BOLT W/O FINGER PULL HOOK
$11.2400Add to Cart The item has been added -
A.L. Hansen
Part# ALH 72 ZN RH
T-Handle, Offset, Padlocking, Steel Material, Zinc Plated, Right Hand, 5/16 In. Square Shaft, 4 In. X 3/4 In. Grip, 3/8 In. Diameter Padlocking Hole
$29.1800Add to Cart The item has been added
A.L. Hansen
In 1920, Augie L. Hansen founded the A. L. Hansen Manufacturing Company in Chicago, an entrepreneurial venture known for its innovative products. One of his notable inventions is the "Hansen Tacker," an industrial stapler, as well as the five-sided "Wrigley Revolving Gum Display" found in drugstores. While these products gained fame, the company primarily focused on manufacturing hardware components for the industrial and vehicle markets. For over ninety-five years, the slogan "Hardware for Hard Wear" has represented the company's commitment to quality. As the trailer and truck body markets evolved, Hansen's handles, hinges, latches, and door locks have remained reliable, with many in the NATM and NTEA community continuing to trust these products today.