-
A.L. Hansen
Part# ALH 52C ZN
Compartment Latch that can be used with any handle using standard 5/16 in. shank. Bushing 4 in. from end of lock. Permits use of flush handle without projection beyond door edge. Heavy duty, zinc plated.
$35.6900Add to Cart The item has been added -
A.L. Hansen
Part# ALH 56 ZN LH
Compartment Latch, Steel Construction with Inside Handle and Locking Trigger, Left Hand, Zinc Plated
$23.8000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 55A ZN RH
Cab Lock with inside handle. Right hand, zinc plated.
$26.4500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 57 ZN LH
Compartment Latch with Inside Handle, for 5/16 in. square shank. No mortising required. For limited space. Can be applied to door frame 2 in. W. Die formed bushing. Left hand. Zinc finish.
$15.1200Add to Cart The item has been added -
A.L. Hansen
Part# ALH 56ASL-51 ZN LH
Heavy Duty Compartment Latch less Bronze Striker, Steel Construction. Accepts 5/16 in. shank with inside handle and locking trigger. Left Hand, Zinc Plated
$64.1800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 55 ZN RH
Compartment Latch with spoon handle, for 5/16 in. square shank. Right hand. Zinc finish
$10.8800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 111A ZN 6
L Handle, Zinc With 1/2x6" Square Shaft
$55.1600Add to Cart The item has been added -
A.L. Hansen
Part# ALH 111A ZN
Padlockable Zinc L Handle With 1/2" Square Shaft.
$37.6900Add to Cart The item has been added -
A.L. Hansen
Part# ALH 111C ZN 545 6
Locking Zinc Handle, 1/2x6" Shaft Ka Ch545
$117.0300Add to Cart The item has been added -
Out of Stock 
-
A.L. Hansen
Part# ALH 111C ZN 1250
Locking Zinc Handle, 1/2" Sqr Shaft, Ka 1250
$116.6900Add to Cart The item has been added -
A.L. Hansen
Part# ALH 114-6X-36 ZN
Rod Only, Zinc Plated, 3/8 in. Diameter, Length 36 in., Slotted Hole
$8.0500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 111C-51 1250
Key Cylinder 1250 For Alh 111c Series Handles
$12.8300Add to Cart The item has been added -
A.L. Hansen
Part# ALH 120 ZN O 3/8
Offset end bolt, accepts 3/8 in. rod, zinc plated
$22.6500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 120 ZN F W/O
Flush End Bolt, accepts 1/4 in. Rod, finger pull or cable eye, Zinc Plated
$13.9800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 111C-51 545
Lock Cylinder For 111c Handles
$12.8300Add to Cart The item has been added
A.L. Hansen
In 1920, Augie L. Hansen founded the A. L. Hansen Manufacturing Company in Chicago, an entrepreneurial venture known for its innovative products. One of his notable inventions is the "Hansen Tacker," an industrial stapler, as well as the five-sided "Wrigley Revolving Gum Display" found in drugstores. While these products gained fame, the company primarily focused on manufacturing hardware components for the industrial and vehicle markets. For over ninety-five years, the slogan "Hardware for Hard Wear" has represented the company's commitment to quality. As the trailer and truck body markets evolved, Hansen's handles, hinges, latches, and door locks have remained reliable, with many in the NATM and NTEA community continuing to trust these products today.