-
A.L. Hansen
Part# ALH 90-W ZN O
End Bolt, Offset, 30 degree, for use with Flat Rod, Zinc Finish
$11.5400Add to Cart The item has been added -
A.L. Hansen
Part# ALH 90 ZN F 3/8
End Bolt, Flush, 3-3/4 in. L x 2-1/8 in. W, Accepts 3/8 in. Dia. Rod, Zinc Finish
$11.2400Add to Cart The item has been added -
A.L. Hansen
Part# ALH 33-24 ZN
Grab Handle, Die Formed Steel Zinc Plated, Overall Length 29 11/16 In., Grab Length 24 1/2 In.
$32.5100Add to Cart The item has been added -
A.L. Hansen
Part# ALH 54 ZN LH
Compartment Latch with Inside handle,Accepts 5/16" Shank, Left hand. Zinc finish. (Left Hand Pictured)
$37.2200Add to Cart The item has been added -
A.L. Hansen
Part# ALH 31-8 ZN 1 HL
Grab Handle, 1/2 In. Diameter Steel, Length 13 In. Height 1 5/8 In. One Mounting Hole On Each End, Zinc Plated
$6.3600Add to Cart The item has been added -
A.L. Hansen
Part# ALH 58 ZN RH
Compartment Latch, accepts 5/16 in. shank, Right Hand, Zinc Plated
$9.5500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 55 ZN LH
Compartment Latch with spoon handle, for 5/16 in. square shank. Left hand. Zinc finish.
$10.8800Add to Cart The item has been added -
Out of Stock 
A.L. Hansen
Part# ALH 56A ZN LH
Compartment Latch, Steel Construction, Accepts 5/16 in. shank with inside handle and locking trigger. Left Hand, Zinc Plated
$37.4500 -
A.L. Hansen
Part# ALH 57 ZN RH
Compartment Latch with Inside Handle, for 5/16 in. square shank. No mortising required. For limited space. Can be applied to door frame 2 in. W. Die formed bushing. Right hand. Zinc finish.
$15.1200Add to Cart The item has been added -
A.L. Hansen
Part# ALH 33-18 ZN
Grab Handle, Die Formed Steel Zinc Plated, Overall Length 23 11/16 In., Grab Length 18 1/2 In.
$25.9800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 56 ZN RH
Compartment Latch, Steel Construction with Inside Handle and Locking Trigger, Right Hand, Zinc Plated
$23.8000Add to Cart The item has been added -
A.L. Hansen
Part# ALH 31-8 AL 1HL
Grab Handle, 1/2 In. Diameter Aluminum, Length 13 In. Height 1 5/8 In. One Mounting Hole On Each End, Aluminum
$7.5600Add to Cart The item has been added -
A.L. Hansen
Part# ALH 55A ZN LH
Cab Lock with inside handle. Left hand, zinc plated.
$26.4500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 58 ZN LH
Compartment Latch, accepts 5/16 in. shank, Left Hand, Zinc Plated
$9.5500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 42H ZN
Universal Sliding Door Latch with Inside Release Lever, Accepts Any Handle with 5/16" Square Shaft, Zinc Plated.
$31.9300Add to Cart The item has been added -
A.L. Hansen
Part# ALH 52C ZN RB
Compartment Latch that can be used with any handle using standard 5/16 in. shank. Bushing 4 in. from end of lock. Permits use of flush handle without projection beyond door edge. Reverse bolt and zinc plated.
$37.3500Add to Cart The item has been added
A.L. Hansen
In 1920, Augie L. Hansen founded the A. L. Hansen Manufacturing Company in Chicago, an entrepreneurial venture known for its innovative products. One of his notable inventions is the "Hansen Tacker," an industrial stapler, as well as the five-sided "Wrigley Revolving Gum Display" found in drugstores. While these products gained fame, the company primarily focused on manufacturing hardware components for the industrial and vehicle markets. For over ninety-five years, the slogan "Hardware for Hard Wear" has represented the company's commitment to quality. As the trailer and truck body markets evolved, Hansen's handles, hinges, latches, and door locks have remained reliable, with many in the NATM and NTEA community continuing to trust these products today.