-
A.L. Hansen
Part# TH555 ZN
Grab Handle, Solid Diecast, Zinc Plated, Overall Length 8 15/16 In. Height 1 25/32 In.Four Mounting For Oval Head Screws
$14.3300Add to Cart The item has been added -
A.L. Hansen
Part# TB550 ZN
Grab Handle, Stamped Steel, Zinc Plated, Hollow, Overall Length 8 15/16 In. Height 1 25/32 In.Four Mounting For Oval Head Screws
$8.3300Add to Cart The item has been added -
A.L. Hansen
Part# CH 2399-D ZN
Grab Handle, .63 Grab Width, Length 11 In., Height 2 In. Zinc Plated
$23.2400Add to Cart The item has been added -
A.L. Hansen
Part# ALH 76 ZN
Zinc Plated Handle, 4 In. X 3/4 In.. Two 7/32 In. Mounting Holes On 1-1/4 In. Centers. 5/16 In. X 3 In. Square Shank.
$26.8100Add to Cart The item has been added -
A.L. Hansen
Part# ALH 33-24 ZN
Grab Handle, Die Formed Steel Zinc Plated, Overall Length 29 11/16 In., Grab Length 24 1/2 In.
$32.5100Add to Cart The item has been added -
A.L. Hansen
Part# ALH 31-8 ZN 1 HL
Grab Handle, 1/2 In. Diameter Steel, Length 13 In. Height 1 5/8 In. One Mounting Hole On Each End, Zinc Plated
$6.3600Add to Cart The item has been added -
A.L. Hansen
Part# ALH 33-18 ZN
Grab Handle, Die Formed Steel Zinc Plated, Overall Length 23 11/16 In., Grab Length 18 1/2 In.
$25.9800Add to Cart The item has been added
A.L. Hansen
In 1920, Augie L. Hansen founded the A. L. Hansen Manufacturing Company in Chicago, an entrepreneurial venture known for its innovative products. One of his notable inventions is the "Hansen Tacker," an industrial stapler, as well as the five-sided "Wrigley Revolving Gum Display" found in drugstores. While these products gained fame, the company primarily focused on manufacturing hardware components for the industrial and vehicle markets. For over ninety-five years, the slogan "Hardware for Hard Wear" has represented the company's commitment to quality. As the trailer and truck body markets evolved, Hansen's handles, hinges, latches, and door locks have remained reliable, with many in the NATM and NTEA community continuing to trust these products today.