-
A.L. Hansen
Part# ALH 55 ZN RH
Compartment Latch with spoon handle, for 5/16 in. square shank. Right hand. Zinc finish
$10.8800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 114-6X-36 ZN
Rod Only, Zinc Plated, 3/8 in. Diameter, Length 36 in., Slotted Hole
$8.0500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 120 ZN O 3/8
Offset end bolt, accepts 3/8 in. rod, zinc plated
$22.6500Add to Cart The item has been added -
A.L. Hansen
Part# ALH 120 ZN F W/O
Flush End Bolt, accepts 1/4 in. Rod, finger pull or cable eye, Zinc Plated
$13.9800Add to Cart The item has been added -
A.L. Hansen
Part# ALH 114-50 ZN
Center Only with Pins and Washers
$25.4000Add to Cart The item has been added -
-
Part# AH 709-S-0 ZN
Slam Latch, Zinc-Plated Steel, 4.87 in. L x 2 in. W
$26.7100Add to Cart The item has been added -
A.L. Hansen
Part# AH 5597 ZN W/H
End Latch Bolt, Finger Pull; Ideal for Drawers and Small Cabinets; with Holes, 7/32 in. Dia. On 1-1/8 in. x 1-1/4 in. Centers, ZN
$7.7300Add to Cart The item has been added -
A.L. Hansen
Part# AH 5597 ZN
End Latch Bolt, Finger Pull, No Holes; Ideal for Drawers and Small Cabinets, ZN
$6.9300Add to Cart The item has been added -
Out of Stock 
A.L. Hansen
Part# AH 16356 ZN
Stiker Pin, Headless, .55 in. Pin Diameter, 7/16 in.-14 Threads, Zinc Plated
$11.2200 -
Part# AE9-01186 ZN
Slam Latch, Zinc Finish - Operated by rod or cable as part of a slam system. Single-point models use a large knurled knob for good grip
$23.5900Add to Cart The item has been added -
Part# AE9-00724
Striker Pin on Mounting Plate, 12.5 mm Pin Diameter, Height 35 mm, Pin is Staked & Brazed, Hardened & Zinc Plated
$14.1300Add to Cart The item has been added -
-
Part# AE9-00805 LH
Exceptionally robust latch with fitted release handle for easy operation. There is a steel follow-bush so that when fitted on inside of a door, latch can be operated from outside by a standard 8mm square shaft. Suitable for heavy compartment doors an
$86.5900Add to Cart The item has been added -
Part# AE9-01529 BLK NYLON
Slam Bolt, Molded in Acetal Copolymer with Stainless Steel Spring, Pull Knob Fitment, Body Length 80 mm, Body Width 29 mm, Body Height 18 mm, Bolt Projection 16 mm
$15.6000Add to Cart The item has been added -
Part# AE9-01243 SS
Latch Bolt with Pull Knob on Top, Nose Down, Stainless Steel, Slam Bolt Projects 17 mm and Withdraws 15 mm, Non-adjustable and Non-Reversible
$36.4700Add to Cart The item has been added