• Compare
  • Create an Account
Toggle Nav
Search
My Cart

Sika

Genesis Gas Springs Finder
  • Extended Length
  • Force lbf (N)
  • Shaft Size MM
  • Shaft Size Inch
  • Stroke
  • Additional Stroke
  • Connector Material
  • Connector Size

Sika Finder
  • Category
  • Type
  • Substrate
  • Color
  • Paintable
  • Submersible
  • Elasticity
  • Cure Mechinism
  • Industry

Continuous hinge finder
  • Overall Length
  • Open Width
  • Knuckle Length
  • Pin Diameter
  • Material
  • Gauge

Continuous hinge finder 2
  • Material
  • Open Width
  • Gauge
  • Pin Diameter
  • Overall Length
  • Knuckle Length

Sika® is a specialty chemicals company with a leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protecting in the building sector and motor vehicle industry.

View as Grid List

Items 1-24 of 103

Page
Set Descending Direction
per page
  1. SIKA-91009
    Sikaflex 1A Elastomeric Joint Sealant/Adhesive
    PART NUMBER:  SIKA-91009
    $12.26
    Out of stock
    Quick Shop Add to Compare
  2. 310000G
    SikaFast High Pressure Pneumatic Dispensing Gun, 490 mL
    PART NUMBER:  310000G
    $913.16
    Out of stock
    Quick Shop Add to Compare
  3. SIKALASTOMER 65 1/8 X 1/2
    SikaLastomer- 65 Isobutylene-Isoprene Copolymer Tape
    PART NUMBER:  SIKALASTOMER 65 1/8 X 1/2
    $11.23
    Out of stock
    Quick Shop Add to Compare
  4. SIKALASTOMER 68
    SikaLastomer-68 Ethylene Propylene Copolymer Tape
    PART NUMBER:  SIKALASTOMER 68
    $0.36
    -
    +
    Quick Shop Add to Compare
  5. SIKA 207 250
    Sika Primer-207 Pigmented, Solvent-Based Primer for Various Substrates
    PART NUMBER:  SIKA 207 250
    $129.04 As low as $65.58
    Out of stock
    Quick Shop Add to Compare
  6. SIKA AKTIVATOR
    Sika Aktivator 100 Adhesion Promoter for Various Substrates
    PART NUMBER:  SIKA AKTIVATOR
    $34.01
    -
    +
    Quick Shop Add to Compare
  7. SIKAFLEX 715
    Sikaflex-715 Semi Self-Leveling Roof Membrane Sealer
    PART NUMBER:  SIKAFLEX 715
    $22.42
    Out of stock
    Quick Shop Add to Compare
  8. Austin Hardware SIK-552WH
    SIKAFLEX ELASTIC ADHESIVE WHITE 300ML CARTRIDGES
    PART NUMBER:  SIK-552WH
    $37.32
    -
    +
    Quick Shop Add to Compare
  9. SIK-A3800P
    V CUT NOZZLES
    PART NUMBER:  SIK-A3800P
    $0.96
    Out of stock
    Quick Shop Add to Compare
  10. SIKA AKTIVATOR UH-2
    Sika AKTIVATOR UH-2 Detectable Activation Agent
    PART NUMBER:  SIKA AKTIVATOR UH-2
    $113.94
    Out of stock
    Quick Shop Add to Compare
  11. SIK-A39000
    Sika Cartridge Nozzles, Uncut
    PART NUMBER:  SIK-A39000
    $0.86
    -
    +
    Quick Shop Add to Compare
  12. SIKA 511
    SikaLastomer-511 Non-Skinning Butyl Sealant for Standing Seam Roofs
    PART NUMBER:  SIKA 511
    $10.35
    Out of stock
    Quick Shop Add to Compare
  13. SIKA SG-10 BLK
    Sikasil SG-10 Fast Cure Neutral Silicone Assembly Sealant
    PART NUMBER:  SIKA SG-10 BLK
    $21.95
    -
    +
    Quick Shop Add to Compare
  14. SIKAFAST 3311
    SikaFast 3311 Fast Curing, 10:1 Mix Ratio, Toughened Low/Medium Modulus Structural Methylmethacrylate Adhesive
    PART NUMBER:  SIKAFAST 3311
    $139.63
    Out of stock
    Quick Shop Add to Compare
  15. SIKAFLEX 271
    Sikaflex-271 PowerCure Designed for PowerCure – Fast Curing High Strength Adhesive System, Black, 600 mL Unipac
    PART NUMBER:  SIKAFLEX 271
    $136.79
    Out of stock
    Quick Shop Add to Compare
  16. SIKAPOWER-4508
    SikaPower 4508 Heat Curing Paint Shop Adhesive and Sealant
    PART NUMBER:  SIKAPOWER-4508
    $47.36
    Out of stock
    Quick Shop Add to Compare
  17. SIKA 95 1/8 X 2
    SikaLastomer 95 Isobutylene Tripolymer Tape
    PART NUMBER:  SIKA 95 1/8 X 2
    $34.31
    Out of stock
    Quick Shop Add to Compare
  18. SLAST-65 1/8X2X30
    SikaLastomer- 65 Isobutylene-Isoprene Copolymer Tape
    PART NUMBER:  SLAST-65 1/8X2X30
    $30.84
    Out of stock
    Quick Shop Add to Compare
  19. SikaPrimer 206 G+P, Case of (4) 1-Liter Cans, Black
    SikaPrimer 206 G+P, Case of (4) 1-Liter Cans, Black
    PART NUMBER:  206-GP-LITER
    $832.64
    Out of stock
    Quick Shop Add to Compare
  20. WS-295 WH 295ML
    Sikasil WS-295 Neutral cure, weather sealing silicone sealant
    PART NUMBER:  WS-295 WH 295ML
    $32.60
    -
    +
    Quick Shop Add to Compare
  21. SIK-136150
    Sika Butyl Sealing Tape
    PART NUMBER:  SIK-136150
    $201.46
    Out of stock
    Quick Shop Add to Compare
  22. SL95 3/16X1/4 BUTYL
    SikaLastomer 95 Isobutylene Tripolymer Tape
    PART NUMBER:  SL95 3/16X1/4 BUTYL
    $8.76
    Out of stock
    Quick Shop Add to Compare
  23. SIKADAMP 630
    SikaDamp 630 Vibration Damping Treatment
    PART NUMBER:  SIKADAMP 630
    $144.91
    Out of stock
    Quick Shop Add to Compare
  24. WS-295 ALUM 295ML
    Sikasil WS-295 Neutral cure, weather sealing silicone sealant
    PART NUMBER:  WS-295 ALUM 295ML
    $32.60
    Out of stock
    Quick Shop Add to Compare
View as Grid List

Items 1-24 of 103

Page
Set Descending Direction
per page
Shop By
Shopping Options
Category
  1. All Products
Price
  1. $0.00 - $999.99
  2. $1,000.00 - $1,999.99
  3. $2,000.00 and above
Color
  1. Gray
  2. Black
  3. White
  4. Dark Gray
  5. Blue
  6. Straw
Shore A Hardness
  1. (CQP 023-1 / ISO 868) 55
  2. Shore D-hardness (ASTM D 2240) 73
  3. (ASTM D 2240) 30
  4. (ASTM D 2240) 50
  5. (ASTM C-661) 25
  6. (21 day) 45±5
  7. (ASTM D 2240) 20
  8. 50
  9. (ASTM D 2240) 35
  10. CQP 023-1 / iso 868 - 38
  11. (CQP 023-1 / ISO 868) 40 Approx.
  12. (ASTM D 2240) 10
  13. Uncured (ASTM C-661): Pigmented 30 +/- 5; Translucent: 15 +/- 5
  14. (CQP 023-1 / ISO 868) 50 approx.
  15. (ASTM D 2240) 40
  16. Shore D hardness (CQP 574) 65
  17. (ASTM D 2240) 52-57
  18. (CQP 023-1 / ISO 868) 65
  19. Uncured (ASTM C-661): Pigmented 35 +/- 5; Translucent: 12 +/- 5
Elongation at break
  1. Elongation (ASTM C 908) 1100% min at 77°F (25°C)
  2. (ASTM D 412) 550%
  3. (CQP 036-1 / ISO 37) 500%
  4. (ASTM D 412) 460 %
  5. (CQP 036-1 / ISO 37) 300%
  6. (CQP 580-5,6 / ISO 527-2) 40%
  7. (ASTM D 412) 500% (ASTM D 1002) 210 psi
  8. (CQP 036-1 / ISO 37) 500% Approx.
  9. (ASTM D 412) 600%
  10. (ASTM D 412) 500%
  11. (ASTM D-412) 800%
  12. 275%
  13. Uncured (ASTM D-412): Pigmented 400%; Translucent: 600%
  14. (CQP 036-1 / ISO 37) 400 % approx.
  15. (ASTM D 412) 400%
  16. (ASTM D-412) 430%
  17. 550%
  18. CQP 036-1 / ISO 37 - 550%
  19. (ASTM D 412) 300 %
Tear propagation resistance
  1. CQP 045-1 / ISO 34 - 55lb/in
  2. (ASTM D 624) 85 pli
  3. 55 lb./in. (ASTM D-624)
  4. (CQP 045-1 / ISO 34) 13 N/mm (74 pli)
  5. (CQP 045-1/ ISO 34) 40 pli Approx.
  6. (ASTM D 624) 29 pli
  7. (CQP 045-1 / ISO 34) 40 pli Approx.
  8. (CQP 045-1 / ISO 34) 10 N/mm (60 pli)
  9. (ASTM D 624) 34 pli
Flexibility
  1. (AAMA 800-92) (ASTM C 734) No cracking or loss of adhesion at -60°F (-51°C)
  2. Excellent flexibility for dynamic joint movement
  3. excellent flexibility for dynamic joint
  4. SikaPower-4508 is a one component, heat-curing adhesive and sealant based on flexibilized epoxy resin.
  5. Movement Accommodation (ASTM C 719) +/-35%
Tensile lap-shear strength
  1. (ASTM D 1002) 580 psi
  2. (CQP 509-1 / ISO 4587) 5 MPa (700 psi)
  3. (CQP 046-1 / ISO 4587) 360 psi Approx.
  4. (ASTM D 1002) 275 psi
  5. (ASTM D 1002) 210 psi
  6. (ASTM D 1002) 300 psi
  7. (CQP 046-1) 2200 psi (15 MPa)
  8. (CQP 580-1,6) with 0.8 mm steel type DC04 10 MPa (1500 psi) layer thickness 0.3 mm
  9. (CQP 509-1 / ISO 4587) 4.5 MPa (650 pis)
  10. (ASTM D 412) 115 psi
  11. CQP 046-1 - 130 psi
Product Line
  1. SikaSil®
  2. SikaFast®
  3. SikaDamp®
  4. SikaPower®
  5. Sika® Primer
  6. Sika® Aktivator
  7. SikaTack®
  8. SikaFlex®
  9. Sika Powercure®
  10. SikaLastomer®
Chemical Base
  1. Solvent-based adhesion promoter
  2. Epoxy polyurethane
  3. Black pigmented solvent-based polyurethane solution
  4. Polyurethane
  5. Toughened 2-component acrylic
  6. Toughened 2-component Methylmethacrylate
  7. Solvent-based polyurethane solution
  8. Butyl
  9. Pigmented solvent-based polyisocyanate solution
  10. 1C Silane-Terminated Polymer
  11. 1-C polyurethane
  12. 1-C Silicone
  13. 1-C Silane terminated polymer
  14. One-part Silane Terminated Polymer
Flash Point
  1. 25°F (-4°C)
  2. 50 °F (10 °C)
  3. > 212 °F (> 100 °C)
  4. 100 °F (38 °C)
  5. (CQP 007-1 / ISO 13736) -4°C (25°F)
  6. (CQP 007-1 / ISO 13736) -13°C (8.6°F)
  7. 219 °F / 104 °C (Method: closed cup)
  8. 194 °F (90 °C)
  9. > 199.9 °F (93.3 °C)
  10. Not applicable
  11. > 214 °F (> 101 °C)
  12. 57°F (14°C)
  13. 25 °F (-4 °C)
  14. 192 °F (89 °C)
  15. 164.3 °F (73.5 °C)
  16. 477 °F (247 °C)
  17. NA
  18. > 399 °F (> 204 °C)
Density
  1. (uncured) 12.1 lb/gal
  2. (uncured) (CQP 006-4) 1.2 kg/l (10.0 lb/gal)
  3. Uncured: Pigmented 11.9 lbs./gal.; Translucent: 8.6 lbs./gal.
  4. (uncured)* 12.7 lb/gal performed at 23 °C and 50 % R.H.
  5. (CQP 006-3 / ISO 2811-1) 0.71 kg / liter (5.9 lb. / gal.)
  6. 1.3 kg/l approx.
  7. ca.1.48 g/cm3 at 73 °F (23 °C)
  8. 11.8 lb/gal
  9. Uncured: Pigmented 11.6 lbs./gal.; Translucent: 8.4 lbs./gal.
  10. ca.0.772 g/cm3 at 60.1 °F (15.6 °C)
  11. Uncured 10.1 lb/gal
  12. (uncured) 12.2 lb/gal
  13. (uncured) 10.8 lb/gal
  14. 8.0 lb/gal (typical); 8.3 lb/gal (Mixed)
  15. Uncured 8.8 lb/gal
  16. 8.30 lb/gal (mixed)
  17. (CQP 006-3 / ISO 2811-1) 0.94 kg / liter (7.8 lb. / gal.)
  18. (uncured) 10 lbs. /gallon, approx. Depends on Color.
  19. (uncured) (CQP 006-4) 1.3 kg/l (10.8 lb/gal)
  20. (Uncured) 10 lbs. /gallon, Approx. Depends on Color
  21. 10 lbs. /gallon, approx. Depends on Color.
  22. Uncured 8.0 lb/gal
  23. Uncured 10.8 lb/galdepending on color
  24. 9.8 lbs/gal (uncured)
  25. 10.8 lb/gal depends on color
  26. (uncured) 10.8 lb/gal depends on color
  27. (uncured) 6.7 lbs/gal
  28. (uncured) (CQP 006-4) 10.6 lbs/gallon Approx.depending on color
  29. 8.1 lb/gal
  30. 10.1 lb/gal
  31. (CQP 1 006-3 / ISO 2811-1) 8.35 lb/gal (1 kg/l) Approx.
  32. Uncured 12.2 lb/gal
  33. 8.30 lb/gal
  34. 12.1 lb/gal
  35. Uncured 11.8 lb/gal
  36. 10.6 lbs/gallon approx.
  37. (uncured) 10.3 lbs/gal
Application Temperature
  1. -35° to 140°F (-32 to 40°C) (product only)
  2. 40°F to 110°F
  3. 50°F - 95°F (10°C - 35°C)
  4. 15° - 35°C (59° - 95°F)
  5. 10 - 35°C (50 - 95°F
  6. 50° - 95°F (10° - 35°C)
  7. 5 to 35°C (41°F to 95°F)
  8. 5 ─ 40 °C
  9. 41°F to 104°F (5°C to 40°C)
  10. 50 - 95°F (10 - 35°C)
  11. 5 to 40°C (41°F to 104°F)
  12. Service temperature -75°F to 350°F (-59°C to 176°C)
  13. -5°F to 120°F (-20°C to 49°C)
  14. -35° to 140°F (-32 to 40°C)
  15. 50–95°F (10 – 35°C)
  16. 41–95°F (5-35°C)
  17. 40°F to 95°F (Approx. 4°C to 35°C)
  18. Product Only - -35° to 140°F (-32 to 40°C) (Note: Substrate and Air Temperature must be between 40° - 105°F (5° - 40°C).)
  19. 41 - 110°F (5- 43°C)
  20. 158°F - 194°F
  21. 41°F - 104°F (5°C - 40°C)
  22. For manual applications: 20 - 50°C (70 - 120°F); For Pump applications: 45 - 50°C (110 - 120°F)
  23. 40°F - 100°F (5°C - 38°C)
  24. 50°-95°F (10°-35°C)
  25. Ambient 50 - 95°F (10 - 35°C)
  26. 5o – 40oC (41o – 105oF)
  27. product -5°F to 120°F (-20°C to 49°C)
  28. product50°- 95°F (10°- 35°C)
  29. 41° to 104°F (-5 to 40°C) (product only)
  30. 40 - 105°F (5 - 40°C )
  31. 40°F - 104°F (5°C - 40°C)
  32. 40°-100°F
  33. product 50°- 95°F (10°- 35°C)
  34. 40° – 110°F(4-43°C)
  35. Ambient 10o – 35oC (50o – 95oF)
Tensile Strength
  1. 175 psi
  2. 225 psi
  3. 220 psi
  4. 600 psi
  5. 260 psi approx
  6. 435 psi
  7. 245 psi
  8. 1300 psi
  9. 870 psi
  10. 1.1 N/mm2 approx
  11. 435 psi approx
Peel Adhesion
  1. Concrete, aluminum, and glass - 20 lbs. peel strength with 0% adhesion loss (ASTM C-794; TT-S-00230C)
  2. (ASTM D 3330 –modified 90° peel) 8 lbs/in. min (cohesive failure)
  3. Peel Strength (ASTM C-794) 30 pli
  4. Peel Strength: (ASTM C 794) 20 pli
Corrosivity
  1. No darkening, etching or salt deposits on GALVALUME, KYNAR 500, ZINCALUME, aluminum, aluminized steel or galvanized metal
  2. Acts as a corrosion inhibitor on metals
  3. Non-Corrosive
Cure mechanism
  1. Moisture-curing
  2. SikaPower-4508 is cured by heat. Curing depends both on temperature and elapsed time. The most suitable heat sources are convection ovens. The minimum heating temperature is 160°C (320°F), while the maximum temperature must not exceed 220°C (430°F). It is
  3. Humidity Curing
  4. Humidity-curing
  5. Free Radical Polymerization
  6. Moisture
  7. Moisture Cured
  8. NA
  9. Moisture Curing
  10. Moisture-cure
Tack Free Time
  1. (CQP 019-1) 40 min at 73 degrees F (23 C) / 50% relative humidity
  2. 60 min. approx.
  3. Tack free time1 < 1 hour
  4. (CQP 019-1) 73°F (23°C) / 50% r.h.. 40 min
  5. 60 min. approx
  6. (ASTM C-679) 50 min.
  7. (CQP 019-1) 40 min. approx. at 23°C (73°F) / 50% RH.
  8. 15 minutes
  9. (CQP 019-1) 40 min. Approx.
  10. 20 – 40 min.
  11. Drying time 10 minutes to 24 hours
  12. 40 min
  13. Tack free time at 77°F (25°C) / 50% r.h.. (ASTM D-679) 30 minutes
  14. 40 min. approx
  15. 30 mins 73 degrees F / 50% relative humidity
  16. 60 min
  17. Tack free time at 77°F (25°C) / 50% r.h. (ASTM D-679) 30 minutes
  18. 3 to 6 hours
  19. 30 minutes
  20. 40 min.
  21. 60 minutes
  22. < 1 hour
  23. 30 min
  24. (CQP 019-1) 40 min at 73°F (23°C) / 50% r.h..
  25. 10 min at 73°F / 50% R.H. drying time
Open Time
  1. 2 (CQP 526-1) 45 min. Approx.
  2. (CQP 526-1) 10 minutes at 23°C (73°F) / 50% r.h.
  3. Extended
  4. 7 min 72°F (22°C) / 3 min 95°F (35°C)
  5. 2 (CQP 526-1) 30 minutes
  6. 45 min
  7. (CQP 526-1) 35 min. Approx.
  8. 35 min. approx
  9. Skin time (CQP 019-11) at 77° F - 3 hours
  10. 45 min. approx.
  11. 10 minutes
  12. 45 min. approx
  13. 5 min - 72°F (22°C) / 2 min - 95°F (35°C)
  14. (CQP 526-1) 35 min. approx. at 23°C (73°F) / 50% RH.
Search Brands All Brands
Featured Brands
A.L. Hansen
C K Power
Eberhard
Ewellix
Genesis
Goebel
GorillaPro®
Hansen International
Huck
Mirka
Plexus
Sika
Southco
TecNiq
Trim-Lok
Trimark
Compare Products
  1. Remove This Item
Compare
Clear All
You have no items to compare.
Account Selector
  • Masquerading as:
  • Revert back to main Account:

* Required Fields

www.austinhardware.com/about-us